Direct Air Kit - 1500mm Long - 80mm/3" diameter

This kit has been designed to fit the Newburn range, Rock CD and SD models of stoves external air feed but will also connect up to many other models on the market. The kits are designed to run directly through a wall and clip onto the direct air feed of a stove with a 80mm / 3" direct pipe. Connecting a direct air feed pipe gives the fire all the oxygen it needs, making it burn to its full potential without creating a draft in the room like standard air vents. A direct air feed kit is always required to be installed if the property is constructed after 2008, or its permeability is lower than 5.0m³/h.m² (Most homes built before 2008)

The kit comprises of:

• 1 x Length of semi-rigid aluminium ducting - 1500mm long 
• 1 x Brushed stainless steel air vent cap with mesh fitting and drilled holes to allow it to be fixed to a wall -
•  (No screws included, as it could be drilled into a number of surfaces) 
• 2 x Stainless steel 304 91-114mm jubilee clips